reqopclubs.blogg.se - Diy flat file plans

Also drill pocket holes in the top edge of the back. Drill pocket holes for 3/4″ material in the top of the sides, as well as one long edge at the back. Step OneĬut the pieces for the sides and the back. Four – 1/4″ plywood 14″ x 15-1/4″ – Drawer BottomsĮdge banding should be applied to all exposed edges before assembly.Four – 1/2″ plywood 13″ x 13″ – Larger Drawer Boxes.Four – 1/2″ plywood 13″ x 15-1/4″ – Larger Drawer Boxes.Four – 1/2″ plywood 5-1/2″ x 13″ – Smaller Drawer Boxes.

Four sets of 14″ drawer slides (ball bearing 3/4 extension).

Two – 1/8″ x 1/2″ x 36″ strips of aluminum.

Edge banding to match the 3/4″ plywood (<– affiliate link!).

1-1/4″ pocket hole screws (The depth should stay the same but the length can be increased to fit your needs! Click on the drawings to enlarge them! An Easy to Build Cabinet for the Home Office!įree furniture plans to build a file cabinet that is easy to build and totally customizable.